Miglia Technology TV Receiver TVMini 2 User Manual

TVMini 2  
User Guide  
Revision 1.0  
(c) 2007, HDMI Ltd  
 
Introduction and Overview  
of TVMini 2  
TVMini2™ User Guide  
Page 1  
 
Introduction  
Thank you for choosing TVMini2™ from Miglia. TVMini2™ lets you watch, pause, rewind and skip forward live digital  
terrestrial TV on your Mac and enables you record TV shows straight to your hard drive.  
TVMini2™ supports the DVB-T standard, called Freeview in the UK and TNT in France  
System requirements:  
Mac with built-in USB 2.0 connectivity  
G4/1.5 GHz or faster, G5, Intel Core processor  
256 MB of RAM  
50 MB Free hard drive space.  
Mac OS X 10.4.x, 10.5.x  
QuickTime 7x  
Area covered by DVB-T signals  
Package contents  
TVMini2  
CD-ROM with The Tube software and user guide (pdf)  
Mini-Antenna  
Quick Install Guide with Software Activation Key  
User Guide Overview  
This User Guide will guide you through the hardware and software installation. A detailed description of The Tube’s  
functionality is available on a separate pdf located on the CD-ROM.  
Technical Support  
Select TVMini2 in the list of products and you will get access to the Frequently Asked Questions, updated product  
manuals as well as links to technical support contact forms.  
TVMini2™ User Guide  
Page 2  
 
Overview of TVMini2  
TVMini2 has a single connector at the back of the unit for the antenna connection. The front of the unit has a USB Type  
A connector.  
USB Connector  
Antenna Connector  
TVMini2™ User Guide  
Page 3  
 
Installing and using  
TVMini2  
and The Tube software  
TVMini2™ User Guide  
Page 4  
 
I. Connecting TVMini2  
1. Connect TVMini2 to a free USB 2.0 port of your Mac.  
2. Connect the mini-antenna to the antenna connector.  
Note: The mini-antenna will only work in areas where DVB-T reception is good. You should not have any  
difficulties receiving the full range of TV stations if you live in Germany or northern European countries. In the UK  
and France, it is strongly recommended to place the antenna near a window, as ‘indoor mobility’ is not yet  
implemented.  
If you do not receive any channels when using the mini-antenna, connect TVMini2 to a roof-top antenna.  
You cannot receive TV signals from CableTV or analogue signals with TVMini2.  
II. Installing The Tube  
1. Insert the The Tube CD-ROM in your CD/DVD Drive  
2. Double-click on ‘Install The Tube’ to launch the installation programme.  
3. Click “Continue” when the alert message informing you that the installation package contains a program that verifies  
if the software can be installed.  
4. When asked, select the destination Hard Drive and Folder where you wish to install The Tube. The default selection  
made by the installer is recommended. Then click “Continue”  
5. On the next screen, click “Install. The installation program will then ask you for your administrator password. This is  
your normal Mac OS X password you created when you first used Mac OS X and not the software activation code.  
TVMini2™ User Guide  
Page 5  
 
6. Once the installation is finished, you can quit the Installer and eject the CD-ROM.  
The Tube software will normally be located on your hard drive, in the Applications folder.  
III. Initial setup for The Tube  
1. Double-click on the application The Tube located in the Applications folder. Make sure your TV Device is connected to  
the USB bus.  
2. When required, please enter the software activation key located on the QuickStart Guide. You will most likely first  
have to create a user account  
3. Once the software is activated, proceed to the next step. The Tube will automatically detect the presence of your  
Miglia TV device. Click “Yes” to configure the device.  
TVMini2™ User Guide  
Page 6  
 
4. Select your country in the Tuning panel and click on Auto-Tune.  
5. Once the Auto-tune function has found channels, click OK and enjoy your new TV!  
For additional information on how to use The Tube software, please refer to the full The Tube user guide located on the  
CD-ROM.  
TVMini2™ User Guide  
Page 7  
 
Warranty Agreement  
Hardware Products:  
Miglia warrants your hardware product against any defect in material and workmanship, under normal use, for a period  
of 2 years. The warranty becomes effective from the date of purchase by the end user.  
If the product is found to be defective within the warranty period, Miglia will, at its sole option, repair or replace the  
defective product.  
Miglia will not, under any circumstances, be liable for direct, special or consequential damages such as, but not limited  
to, damage or loss of property or equipment, loss of profits or revenues, cost of replacement goods, or expense or  
inconvenience caused by service interruptions.  
This warranty is void if:  
The product was operated or stored in abnormal use or maintenance conditions.  
The product was repaired, modified or altered or undergone attempted repair by non-authorised personel, unless  
Miglia has authorised such repair, modification or alteration.  
The product was damaged, abused or misused  
The product was installed without following the supplied installation instructions.  
The serial number of the product is defaced, modified or missing.  
The “Warranty Void” seal on the casing has been modified, removed or broken.  
The decision of Miglia shall be final and binding with regards to the condition of product return and eligibility of repair or  
replacement.  
Software Products:  
Software Products are covered specifically for defective media or manuals only, for a 14 day period. The software license  
you acquired cannot under any circumstance by transferred back to Miglia. Miglia does not warrant or represent that all  
third-party software or hardware will function error-free when used in conjunction with its products.  
How to obtain warranty service:  
To obtain warranty service, within 30 days of the date of purchase, please contact the retailer from whom you made your  
purchase. To obtain warranty service, after 30 days of the date of purchase contact Miglia’s Technical Support Service. A  
proof of purchase will be required to confirm that the product is still under warranty. Should Miglia’s Technical Support  
diagnose a fault on your product, a Return to Manufacturer Authorisation (RMA) number will be issued to you.  
All products returned to Miglia must be securely packaged in their original box and shipped at the customer’s cost  
inclusive of any requested documentation. Return shipment of repaired or replaced product will be covered by Miglia.  
Any product returned without an RMA number issued by Miglia’s Technical Support Service will be refused.  
TVMini2™ User Guide  
Page 8  
 

Milwaukee Cordless Saw 2445 20 User Manual
Milwaukee Power Hammer 5366 1 User Manual
Nikon Camera Accessories AC 2WE User Manual
Nokia Satellite TV System 121 T User Manual
Northern Industrial Tools Grinder 157791 User Manual
Numark Industries Car Stereo System CDN88 User Manual
NuTone Fan QTXN110HL User Manual
Optiview Home Security System 10XSPD User Manual
Panasonic Mixer AW PH405 User Manual
Panasonic Network Router BL PA100KTCE User Manual