ADTRAN Network Card ATM Mini DSLAM User Manual

Global  
ATM Mini-DSLAM  
Total Access 1210 ATM Mini-DSLAM  
Product Features  
utilization, as subscriber needs dictate. Using  
multiple shelves for a single network feed can  
scale the unit into a system-wide RT solution  
with up to 96 ports. It supports an ADSL  
service range of 18,000 feet.  
Carriers want to deploy DSLAM solutions  
that can leverage their existing telecommu-  
nications resources. They are looking for  
solutions that control cost, promote effi-  
ciency, and simplify operations. The  
ADTRAN Total Access 1210 is a temperature-  
hardened DSLAM that enables delivery of  
24 ports of POTS and ADSL from smaller  
Central Offices (COs), Controlled  
Cost-effective DSLAM for  
CO, CEV, RT, and customer  
premises applications  
24 ports of ADSL plus  
baseband POTS  
Developed with ADTRANs concern for  
carrier field needs, the Total Access 1210 has  
pre-installed fan modules complete with fan  
filters. Each fan module and fan filter is inde-  
pendently field replaceable. The fans are  
controlled by heat-sensing circuits and will  
run only when necessary. Front panel access  
is available for all connections. The unit is  
interoperable with any E1 IMA device that is  
built to current IMA specifications, which  
includes the Total Access 3000 IMA  
DMT, G.Lite, and T1.413  
modulations  
Front panel access to all  
connections  
Environmental Vaults (CEVs), Multiple  
Dwelling Units (MDUs), and Remote  
Two field replaceable GMT  
type 3 amp fuses  
Terminals (RTs). The ADSL is generated  
locally and placed, via onboard splitters, on  
the same pair as the corresponding POTS  
signal for delivery to the customer. The  
DSLAM performs Inverse Multiplexing over  
ATM (IMA) for up to four E1 IMA links.  
POTS service is not power  
dependent  
Provisioning and alarm  
monitoring via SNMP/ASCII  
text and TL1 through the local  
craft interface and ATM  
Aggregation System.  
ADTRAN has engineered a compact, 1U  
high unit that provides RT space savings while  
offering multiple options for placement  
within the RT. Design flexibility leverages  
existing facilities and enables the Total Access  
1210 to be mounted as a rack, wall, or vertical  
positioned unit inside the RT. It measures 4.45  
cm H x 43.82 cm W x 28.26 cm D and offers  
redundant power using –42 to –56 VDC.  
Management is made simple and conven-  
ient through a choice of SNMP, ASCII, TL1, or  
10Base-T Ethernet support. Provisioning,  
alarms, and performance monitoring are  
provided through the local craft interface and  
ATM in-band management channel.  
in-band management channel  
Inverse Multiplexing over  
ATM (IMA) for up to four  
E1 IMA links  
Interoperable with any  
E1 IMA device that is built to  
current IMA specifications  
which includes the  
Total Access 3000 IMA  
Aggregation System  
ADTRANs Total Access 1210 Mini-DSLAM  
brings a cost-effective and efficient IMA,  
ADSL, and POTS solution to carriers providing  
subscriber services at rural CO, MDU, CEV,  
and RT sites.  
The Total Access 1210 offers a scalable  
network interface today with the Quad IMA  
module. Future capabilities include Octal  
IMA, DS3, and STM-1. These modules assure  
easy deployment and dynamic network  
 

3Com Network Card 3C510 User Manual
3M Grinder 20237 User Manual
ADTRAN Network Card MX2800 M13 User Manual
Agri Fab Spreader 45 03291 User Manual
Aiphone Cell Phone RA A User Manual
Aiwa Car Stereo System ADC M55YU User Manual
AllerAir Air Cleaner 8000 Exec UV User Manual
Ask Proxima Projector DP6105 User Manual
Atlas Sound Telephone CE Series User Manual
Beko Freezer BZ 77F User Manual